Hex Head (AKB)
Stainless subgroup with A2/A4 options and technical application notes. Standards reference
Head/Drive: TechnicalThread/Point: TechnicalMaterial: A2/A4Standard
Open detail page
Drill Point Screws - | Dimensions and Technical Data
Technical content page for Drill Point Screws - with A2/A4 and DIN/ISO reference scope
SEO keywords: stainless screw, Technical, A2/A4, , technical drawing and dimension parameters
Subproduct Catalog
Choose a subgroup card to open the dedicated technical detail page for applications, parameters, standards, and catalog references.
Washer Head Phillips (RYSB)
Stainless subgroup with A2/A4 options and technical application notes. Standards reference
Head/Drive: TechnicalThread/Point: TechnicalMaterial: A2/A4Standard
Open detail page
Torx Pan
Stainless subgroup with A2/A4 options and technical application notes. Standards reference
Head/Drive: TechnicalThread/Point: TechnicalMaterial: A2/A4Standard
Open detail page
Torx Washer Head
Stainless subgroup with A2/A4 options and technical application notes. Standards reference
Head/Drive: TechnicalThread/Point: TechnicalMaterial: A2/A4Standard
Open detail page
Torx Countersunk
Stainless subgroup with A2/A4 options and technical application notes. Standards reference
Head/Drive: TechnicalThread/Point: TechnicalMaterial: A2/A4Standard
Open detail page
Countersunk Phillips (YHB)
Stainless subgroup with A2/A4 options and technical application notes. Standards reference
Head/Drive: TechnicalThread/Point: TechnicalMaterial: A2/A4Standard
Open detail page
Pan Phillips (YSB)
Stainless subgroup with A2/A4 options and technical application notes. Standards reference
Head/Drive: TechnicalThread/Point: TechnicalMaterial: A2/A4Standard
Open detail page
Card images are loaded from /assets/img/products/paslanmaz-vidalar/matkap-uclu-vidalar/ with automatic technical fallback.
Quick Access
Technical Note
These pages are built as technical guidance for stainless fastener families. Dimensions and standards can vary by product geometry, and content is expanded progressively as references are validated.
Production Scope
This page is prepared as a manufacturer-oriented technical reference for stainless fastening products. Production planning follows a manufacturable approach based on geometry, process capability, and application conditions.
A2 (304) and A4 (316) material options are available according to project requirements.
Manufacturable Variations
- Material options: A2 (304) / A4 (316)
- Diameter and length ranges: project-based
- Drive and head-form alternatives
- Packaging, labeling, and marking plans
- Process notes aligned with technical drawings and quality planning
Technical Preview / Technical Drawing
Drawing and visual content are updated with validated technical documents.
This area supports technical orientation; final acceptance is based on approved engineering drawings.
Dimensions / Parameters
For parameter definitions, see the Technical Glossary -> Dimension Parameters
| Parameter | Detail |
|---|---|
| d (nominal diameter) | Project-based |
| L (length) | Project-based |
| Head / drive | Depends on product geometry |
| Material | A2 / A4 |
Tolerances and Standardization
Tolerance targets are determined by product geometry, process capability, and approved technical documentation. Information here is guidance-oriented.
Standards (DIN/ISO)
- DIN reference: geometry-family reference.
- ISO reference: equivalent technical reference.
- Final standards set is published after technical review.
Catalog
Catalog PDF
Catalog card for validated dimensions and variation ranges.
FAQ
Can you produce different lengths?
Yes. Length and diameter combinations are reviewed as project-based manufacturable ranges.
How should I choose A2 vs A4?
A2 (304) fits many general environments, while A4 (316) is preferred for more aggressive exposure conditions.
Which standards should I reference?
Reference standards depend on geometry and application, and are finalized during technical review.
How do I read dimensions?
Use the parameter table together with the glossary definitions.
Can I request technical support?
Yes, please use the Contact page.